How to Calibrate an Absolute Pressure Transmitter - Calibration was developed from the DIN Standard Spesification 28418. The initial requirement is that the residual gas pressure should be lower than the initial calibration bya a factor of 50. This means that if the initial calibration pressure is 0,1 bar so the residual gas pressure must be at least 2x10 -3 mbar.
Tampilkan postingan dengan label working instruction. Tampilkan semua postingan
Tampilkan postingan dengan label working instruction. Tampilkan semua postingan
Differential Pressure Transducers Calibration Procedure
Differential Pressure Transducers Calibration Procedure by M. Kojima, K. Saitou and T. Kobata (pdf download) - The indications of some types of differential pressure transducers are affected by the calibration procedure such as pressurization sequence, the line pressure and environmental conditions: it is known that hysteresis, zero drifts and span readings of some transducers depend on those parameters. When the calibrated transducer is used as a working standard in another calibration, therefore, it is necessary to use the same procedure as previous calibration. Otherwise, the calibration results sometimes differ according to the measurement condition.
How to Use the Fluke 718Ex to Calibrate a Pressure Switch
How to Use the Fluke 718Ex to Calibrate a Pressure Switch - It is important to be familiar with intrinsically safe work practices before performing any maintenance task in a classified area where explosive gasses may be present. Be sure to take proper precautions and refer to the 718Ex users manual and Fluke 718Ex CCD before proceeding.
Three-Phase AC Induction Motors Construction
Three-phase AC induction motors Construction - Three-phase AC induction motors are commonly used in industrial applications. This type of motor has three main parts, rotor, stator, and enclosure. The stator and rotor do the work, and the enclosure protects the stator and rotor.

How To Read AC Motor Nameplate Data
How To Read AC Motor Nameplate Data - The nameplate of a motor provides important information necessary when applying a motor to an AC drive. The following drawing illustrates the nameplate of a sample 20 horsepower AC motor.
Langganan:
Postingan (Atom)